Patton 4524 (4 FXO, 4 FXS)

From SIPfoundry sipx, The Open Source SIP PBX for Linux - Calivia

Jump to: navigation, search

This configuration is for a Patton Smartnode running with sipXecs utilizing SRV records.

Replace: 

 IP.ADDR.OF.DNS   - The IP address of your DNS server
 IP.ADDR.OF.NTP   - The IP address of your NTP server
 GW.SIP.DOMAIN    - The FQDN of your gateway
 IP.ADDR.OF.GW    - The Ethernet IP Address of your gateway
 SUB.NET.MASK.GW  - The Subnet Mask of the gateway
 IP.ADDR.OF.DEFGW - The IP address of the network default IP gateway
 SIP.DOMAIN       - The SIP Domain setup in your SRV records
 EXT1             - The first extension or alias to route inbound calls to during the day
 EXT2             - The second extension or alias to route inbound calls to during the day
 EXT3             - The third extension or alias to route inbound calls to during the day
 EXT4             - The fourth extension or alias to route inbound calls to during the day

Misc: 

 Hunt1            - The Hunt1 hunt group determins the ring order of incoming calls
 IF-INBOUND1      - The first SIP address to Ring
 IF-INBOUND2      - The second SIP address to Ring
 IF-INBOUND3      - The third SIP address to Ring
 IF-INBOUND4      - The fourth SIP address to Ring
 RT_DATE          - Routing table for Day of Week



#----------------------------------------------------------------#
#                                                                #
# SN4524/JO/EUI                                                  #
# R3.21 2007-03-23 H323 SIP FXS FXO                              #
# 2007-06-05T14:20:55                                            #
# Generated configuration file                                   #
#                                                                #
#----------------------------------------------------------------# 

cli version 3.20
clock local offset -04:00
dns-client server IP.ADDR.OF.DNS
dns-relay
webserver port 80 language en
snmp community public ro
sntp-client
sntp-client server primary IP.ADDR.OF.NTP port 123 version 4
sntp-client poll-interval 36000
sntp-client local-clock-offset
system hostname GW.SIP.DOMAIN 

system

  ic voice 0
    low-bitrate-codec g729

profile napt NAPT

profile ppp default

profile call-progress-tone US_Dialtone
  play 1 0 350 -13 440 -13

profile call-progress-tone US_Alertingtone
  play 1 2000 440 -19 480 -19
  pause 2 4000

profile call-progress-tone US_Busytone
  play 1 500 480 -24 620 -24
  pause 2 500

profile tone-set default

profile tone-set US
  map call-progress-tone dial-tone US_Dialtone
  map call-progress-tone ringback-tone US_Alertingtone
  map call-progress-tone busy-tone US_Busytone
  map call-progress-tone release-tone US_Busytone
  map call-progress-tone congestion-tone US_Busytone

profile voip default
  codec 1 g711ulaw64k rx-length 20 tx-length 20
  codec 2 g729 rx-length 20 tx-length 20

profile pstn default

profile sip default

profile aaa default
  method 1 local
  method 2 none

context ip router

  interface eth0
    ipaddress IP.ADDR.OF.GW SUB.NET.MASK.GW
    tcp adjust-mss rx mtu
    tcp adjust-mss tx mtu

context ip router
  route 0.0.0.0 0.0.0.0 IP.ADDR.OF.DEFGW 0

context cs switch
  digit-collection timeout 3

  routing-table called-e164 TAB-OUT
    route .%T dest-interface IF-SIP

#
# Outbound call Routing table.  Pick FXO's in reverse order to elminate glare.
#
  routing-table called-e164 TAB-IN
    route ...%T dest-service FXOHUNT 

#
# Route inbound calls based on day of week.
# If calls some in on Saturday or Sunday route to MAP_WEEKEND.
# Else, route to table RT_TOD.
#
  routing-table day-of-week RT_DATE
    route saturday dest-interface IF-SIP1 MAP_WEEKEND
    route sunday dest-interface IF-SIP1 MAP_WEEKEND
    route default dest-table RT_TOD

#
# Route inbound calls based on time of day.
# If calls come in between 07:30 and 15:30 route to HUNT1
# Else, route to MAP_WEEKEND
#
  routing-table time RT_TOD
    route default dest-interface IF-SIP1 MAP_WEEKEND
    route 07:30:00-15:30:00 dest-service HUNT1

#
# Route calls to extension 100@SIP.DOMAIN
#
  mapping-table time to called-e164 MAP_WEEKEND
    map default to 100

  interface sip IF-SIP
    bind gateway GW-SIP
    service default
    route call dest-table TAB-IN
    remote SIP.DOMAIN

  interface sip IF-SIP1
    bind gateway GW-SIP
    service default
    route call dest-table TAB-IN
    remote SIP.DOMAIN

  interface sip IF-INBOUND1
    bind gateway GW-SIP
    service default
    route call dest-table TAB-IN
    remote SIP.DOMAIN
    address-translation outgoing-call to-header user-part fix EXT1 host-part fix SIP.DOMAIN

  interface sip IF-INBOUND2
    bind gateway GW-SIP
    service default
    route call dest-table TAB-IN
    remote SIP.DOMAIN
    address-translation outgoing-call to-header user-part fix EXT2 host-part fix SIP.DOMAIN

  interface sip IF-INBOUND3
    bind gateway GW-SIP
    service default
    route call dest-table TAB-IN
    remote SIP.DOMAIN
    address-translation outgoing-call to-header user-part fix EXT3 host-part fix SIP.DOMAIN

  interface sip IF-INBOUND4
    bind gateway GW-SIP
    service default
    route call dest-table TAB-IN
    remote SIP.DOMAIN
    address-translation outgoing-call to-header user-part fix EXT4 host-part fix SIP.DOMAIN

  interface fxo PSTN
    disconnect-signal loop-break
    use profile tone-set US

#
# Route inbound call to RT_DATE
#
  interface fxo IF_FXO0
    route call dest-table RT_DATE
    disconnect-signal busy-tone
    dial-after timeout 2
    mute-dialing
    use profile tone-set US

#
# Route inbound call to RT_DATE
#
  interface fxo IF_FXO1
    route call dest-table RT_DATE
    disconnect-signal busy-tone
    dial-after timeout 2
    mute-dialing
    use profile tone-set US

#
# Route inbound call to RT_DATE
#
  interface fxo IF_FXO2
    route call dest-table RT_DATE
    disconnect-signal busy-tone
    dial-after timeout 2
    mute-dialing
    use profile tone-set US

#
# Route inbound call to RT_DATE
#
  interface fxo IF_FXO3
    route call dest-table RT_DATE
    disconnect-signal busy-tone
    dial-after timeout 2
    mute-dialing
    use profile tone-set US

#
# Outbound call routing.  Interface IF_FXO3 is left out in this example.
#
  service hunt-group FXOHUNT
    drop-cause normal-unspecified
    drop-cause no-circuit-channel-available
    drop-cause network-out-of-order
    drop-cause temporary-failure
    drop-cause switching-equipment-congestion
    drop-cause access-info-discarded
    drop-cause circuit-channel-not-available
    drop-cause resources-unavailable
    drop-cause user-busy
    drop-cause destination-out-of-order
    route call 1 dest-interface IF_FXO2
    route call 2 dest-interface IF_FXO1
    route call 3 dest-interface IF_FXO0 

  service distribution-group HUNT1
    timeout 10
    min-concurrent 1
    route call 1 dest-interface IF-INBOUND1
    route call 2 dest-interface IF-INBOUND2
    route call 3 dest-interface IF-INBOUND3
    route call 4 dest-interface IF-INBOUND4 

context cs switch
  no shutdown

gateway sip GW-SIP
  bind interface eth0 router

  service default
    domain SIP.DOMAIN

gateway sip GW-SIP
  no shutdown

port ethernet 0 0
  medium auto
  encapsulation ip
  bind interface eth0 router
  no shutdown

port ethernet 0 1
  medium 10 half
  shutdown

port fxo 0 0
  flash-hook-duration 50
  use profile fxo us
  caller-id format bell
  encapsulation cc-fxo
  bind interface IF_FXO0 switch
  no shutdown 

port fxo 0 1
  flash-hook-duration 50
  use profile fxo us
  caller-id format bell
  encapsulation cc-fxo
  bind interface IF_FXO1 switch
  no shutdown

port fxo 0 2
  flash-hook-duration 50
  use profile fxo us
  caller-id format bell
  encapsulation cc-fxo
  bind interface IF_FXO2 switch
  no shutdown

port fxo 0 3
  flash-hook-duration 50
  use profile fxo us
  caller-id format bell
  encapsulation cc-fxo
  bind interface IF_FXO3 switch
  no shutdown
Retrieved from "http://sipx-wiki.calivia.com/index.php/Patton_4524_%284_FXO%2C_4_FXS%29"
Personal tools