Patton 4118 (4 FXO, 4 FXS)

From SIPfoundry sipXecs IP PBX, The Open Source SIP PBX for Linux - Calivia

Jump to: navigation, search

The following configuration is for a Patton SmartNode 4118 gateway (4 FXO and 4 FXS ports).

The FXO ports are set to ring in to sip:100@xyz.com. Also oubound dialing on the FXO ports is in reverse port order.

The FXS ports are set to register with the SIP pbx (SRV records are being used). The extensions used are 614, 615, 616 and 617.

Caller-id is also being used in this example.

Also, the gateway is not stripping any digits, it is simply dialing what is passed to it. 


 #----------------------------------------------------------------#
 #                                                                #
 # SN4118/4JS4JO/EUI                                              #
 # R3.20 2006-05-23 H323 SIP FXS FXO                              #
 # 2006-09-04T07:48:18                                            #
 # Generated configuration file                                   #
 #                                                                #
 #----------------------------------------------------------------#
 
 cli version 3.20
 administrator administrator password ****** encrypted
 dns-client server XXX.XXX.XXX.XXX
 dns-client server XXX.XXX.XXX.XXX
 webserver port 80 language en
 sntp-client
 sntp-client server primary time-b.nist.gov port 123 version 4
 sntp-client server secondary 192.43.244.18 port 123 version 4
 sntp-client poll-interval 36000
 sntp-client local-clock-offset
 sntp-client gmt-offset - 05:00:00
 system hostname gateway.xyz.com
 
 system
 
   ic voice 0
     low-bitrate-codec g729
 
 profile ppp default
 
 profile call-progress-tone US_Dialtone
   play 1 0 350 -13 440 -13
 
 profile call-progress-tone US_Alertingtone
   play 1 2000 440 -19 480 -19
   pause 2 4000
 
 profile call-progress-tone US_Busytone
   play 1 500 480 -24 620 -24
   pause 2 500
 
 profile call-progress-tone US_FastBusy
   play 1 250 480 -24 620 -24
   pause 2 250
 
 profile tone-set default
 
 profile tone-set US
   map call-progress-tone dial-tone US_Dialtone
   map call-progress-tone ringback-tone US_Alertingtone
   map call-progress-tone busy-tone US_Busytone
   map call-progress-tone release-tone US_FastBusy
   map call-progress-tone congestion-tone US_Busytone
 
 profile voip default
   codec 1 g711ulaw64k rx-length 20 tx-length 20
   codec 2 g729 rx-length 20 tx-length 20
   fax transmission 1 relay t38-udp
   fax transmission 2 bypass g711ulaw64k
 
 profile pstn default
 
 profile sip default
 
 profile aaa default
   method 1 local
   method 2 none
 
 context ip router
 
   interface eth0
     ipaddress XXX.XXX.XXX.XXX 255.255.255.0
     tcp adjust-mss rx mtu
     tcp adjust-mss tx mtu
 
 context ip router
   route 0.0.0.0 0.0.0.0 172.16.16.1 0
 
 context cs switch
   digit-collection timeout 3
 
   routing-table called-e164 TAB-OUT
     route .%T dest-interface IF-SIP
 
   routing-table called-e164 TAB-IN
     route 614 dest-interface IF-FXS0
     route 615 dest-interface IF-FXS1
     route 616 dest-interface IF-FXS2
     route 617 dest-interface IF-FXS3
     route default dest-service FXOHUNT
 
   mapping-table called-e164 to called-e164 STRIP
     map .% to \1
 
   interface sip IF-SIP
     bind gateway GW-SIP
     service default
     route call dest-table TAB-IN
     remote xyz.com
 
   interface sip IF-SIP1
     bind gateway GW-SIP
     service default
     route call dest-table TAB-IN
     remote xyz.com
     address-translation outgoing-call to-header user-part fix 100 host-part interface
 
   interface fxs IF-FXS0
     route call dest-table TAB-OUT
     no call-waiting
     call-transfer
     caller-id-presentation mid-ring
     subscriber-number 614
     use profile tone-set US
 
   interface fxs IF-FXS1
     route call dest-table TAB-OUT
     no call-waiting
     call-transfer
     caller-id-presentation mid-ring
     subscriber-number 615
     use profile tone-set US
 
   interface fxs IF-FXS2
     route call dest-table TAB-OUT
     no call-waiting
     call-transfer
     caller-id-presentation mid-ring
     subscriber-number 616
     use profile tone-set US
 
   interface fxs IF-FXS3
     route call dest-table TAB-OUT
     no call-waiting
     call-transfer
     caller-id-presentation mid-ring
     subscriber-number 617
     use profile tone-set US
 
   interface fxo PSTN
     ring-number on-caller-id
     use profile tone-set US
 
   interface fxo IF_FXO0
     route call dest-interface IF-SIP1
     disconnect-signal busy-tone
     ring-number on-caller-id
     dial-after timeout 2
     use profile tone-set US
 
   interface fxo IF_FXO1
     route call dest-interface IF-SIP1
     disconnect-signal busy-tone
     ring-number on-caller-id
     dial-after timeout 2
     use profile tone-set US
 
   interface fxo IF_FXO2
     route call dest-interface IF-SIP1
     disconnect-signal busy-tone
     ring-number on-caller-id
     dial-after timeout 2
     use profile tone-set US
 
   interface fxo IF_FXO3
     route call dest-interface IF-SIP1
     disconnect-signal busy-tone
     ring-number on-caller-id
     dial-after timeout 2
     use profile tone-set US
 
   service hunt-group FXOHUNT
     drop-cause normal-unspecified
     drop-cause no-circuit-channel-available
     drop-cause network-out-of-order
     drop-cause temporary-failure
     drop-cause switching-equipment-congestion
     drop-cause access-info-discarded
     drop-cause circuit-channel-not-available
     drop-cause resources-unavailable
     drop-cause user-busy
     drop-cause destination-out-of-order
     route call 1 dest-interface IF_FXO3
     route call 2 dest-interface IF_FXO2
     route call 3 dest-interface IF_FXO1
     route call 4 dest-interface IF_FXO0
 
 context cs switch
   no shutdown
 
 gateway sip GW-SIP
   bind interface eth0 router
 
   service default
     registrar xyz.com
     user 614 password ******** encrypted
     user 615 password ******** encrypted
     user 616 password ******** encrypted
     user 617 password ******** encrypted
 
 gateway sip GW-SIP
   no shutdown
 
 port ethernet 0 0
   medium auto
   encapsulation ip
   bind interface eth0 router
   no shutdown
 
 port fxs 0 0
   caller-id format bell
   use profile fxs us
   encapsulation cc-fxs
   bind interface IF-FXS0 switch
   no shutdown
 
 port fxs 0 1
   use profile fxs us
   encapsulation cc-fxs
   bind interface IF-FXS1 switch
   no shutdown
 
 port fxs 0 2
   use profile fxs us
   encapsulation cc-fxs
   bind interface IF-FXS2 switch
   no shutdown
 
 port fxs 0 3
   use profile fxs us
   encapsulation cc-fxs
   bind interface IF-FXS3 switch
   no shutdown
 
 port fxo 0 0
   flash-hook-duration 50
   use profile fxo us
   caller-id format bell
   encapsulation cc-fxo
   bind interface IF_FXO0 switch
   no shutdown
 
 port fxo 0 1
   flash-hook-duration 50
   use profile fxo us
   caller-id format bell
   encapsulation cc-fxo
   bind interface IF_FXO1 switch
   no shutdown
 
 port fxo 0 2
   flash-hook-duration 50
   use profile fxo us
   caller-id format bell
   encapsulation cc-fxo
   bind interface IF_FXO2 switch
   no shutdown
 
 port fxo 0 3
   flash-hook-duration 50
   use profile fxo us
   caller-id format bell
   encapsulation cc-fxo
   bind interface IF_FXO3 switch
   no shutdown
Retrieved from "http://sipx-wiki.calivia.com/index.php/Patton_4118_(4_FXO,_4_FXS)"
Personal tools